If you want more bass from your Model Y without sacrificing cargo space or fitment, the right enclosure makes a big difference. The best options balance enclosure type, install simplicity, and sound goals.
Below, we focus on tesla model y subwoofer enclosures that are built for the vehicle or closely matched for practical performance, so you can choose confidently.
Best 10 Tesla Model Y Subwoofer Enclosures Picks for 2026
Factory-Fit Side-Firing Upgrade
Skar Audio 10" Loaded Model Y Enclosure
- Loaded 10-inch VD-10 D2 subwoofer
- Pre-wired to 1-ohm final impedance
- Fits 2020-2024 Model Y and early 2025 non-Juniper
Best For: Drivers wanting a ready-to-use, vehicle-specific loaded enclosure.
Passenger-Side Bass Package
NVX Model Y Subwoofer and Box Package
- Includes NVX VSW104v2 subwoofer
- Fits passenger-side trunk cubby
- Package includes wiring kit and LOC
Best For: Shoppers who want an all-in-one bass package for a 2020-2021 Model Y.
Universal SPL Ported Option
Skar Audio 8" Ported Enclosure
- Universal-fit 8-inch ported enclosure
- Tuned at 46 Hz for deep bass
- Requires a separate 8-inch subwoofer
Best For: Universal audio builds that need a compact ported enclosure.
Custom Empty Passenger-Side Box
- Fits 2020-2023 Model Y 5-seat models
- Empty 10-inch enclosure for custom sub choice
- Pre-wired terminal cup and speaker wire included
Best For: DIY buyers wanting a custom-fit empty enclosure for their own subwoofer.
Universal Dual-8 Ported Bass Box
- Dual 8-inch ported design
- Kerf port tuned to 39 Hz
- Push terminals with leads included
Best For: A universal high-output dual-8 bass setup
Tesla Model Y Driver-Side Empty Box
- Custom fit for 2020-2023 Model Y
- Empty fiberglass sealed enclosure
- Fits one 10-inch subwoofer
Best For: Model Y owners wanting a custom-fit sealed box
Loaded Tesla Model 3 Bass Box
Skar Audio 10" Side-Firing Enclosure
- Loaded 10-inch Skar sub included
- Pre-wired to 1-ohm final load
- Fits 2017-2023 Tesla Model 3
Best For: A plug-and-play loaded Tesla Model 3 bass solution
OEM-Style Fit
NVX Single 10" Empty Box for Model S/Y
- Driver-side trunk fit for Tesla Model S and Model Y
- Empty sealed enclosure for one standard 10-inch sub
- Fiberglass build with pre-wired terminal cup
Best For: owners who want a custom-fit sealed box and will choose their own 10-inch subwoofer
Model Y Sealed Fit
Skar Audio Single 10" Sealed Enclosure for Model Y
- Fits 2020-2024 Tesla Model Y and early 2025 non-Juniper
- Side-firing sealed enclosure with 0.81 cu. ft. air space
- Includes pre-soldered 12-gauge OFC wiring
Best For: Tesla Model Y owners who want a sealed, side-firing 10-inch enclosure
Compact Model 3 Fit
NVX 10" Empty Sealed Box for Model 3
- Driver-side fit for 2017-2022 Tesla Model 3
- Compact sealed enclosure with 0.65 cu. ft. volume
- Pre-wired terminal cup and carpeted fiberglass shell
Best For: Tesla Model 3 owners who want a compact sealed enclosure and will supply their own subwoofer
Factory-Fit Side-Firing Upgrade – Skar Audio 10" Loaded Model Y Enclosure
Skar Audio Single 10" Loaded Subwoofer Enclosure Compatible with 2020-2024 Tesla Model Y Vehicles
Check Price On AmazonIf you want tesla model y subwoofer enclosures that add bass without giving up a lot of trunk utility, this Skar Audio loaded box is built for the 2020-2024 Model Y and early 2025 non-Juniper models. It comes pre-loaded with a 10-inch VD-10 D2 subwoofer, a lightweight fiberglass enclosure, and a side-firing layout designed for vehicle-specific fitment.
Best For: Model Y owners who want an all-in-one, vehicle-specific loaded enclosure with simple installation and strong bass output.
Pros:
- Loaded with a Skar Audio VD-10 D2 10-inch subwoofer.
- Pre-wired to a 1-ohm final impedance load at the terminal cup.
- Lightweight fiberglass construction with automotive-grade black trunk-liner carpeting.
- Compatible with 2020-2024 Tesla Model Y vehicles and early 2025 non-Juniper Model Y.
Cons:
- Single-sub setup may not satisfy listeners wanting maximum output.
- Vehicle-specific design limits use outside the listed Model Y fitment.
This is a practical pick if you want a ready-to-install enclosure rather than building a system from scratch. The loaded design and factory-style finish make it an easy route to adding bass in a Tesla-specific package.
Passenger-Side Bass Package – NVX Model Y Subwoofer and Box Package
Among tesla model y subwoofer enclosures, this NVX package is aimed at owners who want a complete bass solution for the 2020-2021 Model Y. It combines a passenger-side fiberglass enclosure with an NVX VSW104v2 subwoofer and includes the amplifier wiring pieces and line-out converter needed to build the system around it.
Best For: Model Y owners who want a bundled subwoofer-and-enclosure package with included install components.
Pros:
- Includes an NVX VSW104v2 subwoofer in the package.
- Passenger-side fiberglass enclosure is made for the trunk cubby on the right side.
- Claims up to 500 watts RMS of bass output.
- Bundle includes amplifier wiring kit and line-out converter.
Cons:
- Fitment is limited to Tesla Model Y 2020-2021.
- Designed for a specific passenger-side storage cubby, so placement is not universal.
This package makes sense if you want fewer moving parts and prefer a matched enclosure/subwoofer bundle. It is less flexible than a blank enclosure, but the included components can simplify planning for a Tesla audio upgrade.
Universal SPL Ported Option – Skar Audio 8" Ported Enclosure
Skar Audio AR1X8V-SPL Single 8" SPL Series Universal Fit Armor Coated Ported Subwoofer Enclosure
Check Price On AmazonIf you are comparing tesla model y subwoofer enclosures but also want a universal enclosure for other builds, this Skar Audio AR1X8V-SPL is a ported 8-inch box built for deep bass and strong SPL output. It is not Tesla-specific, but its compact ported design, rear side port, and rugged MDF construction can suit systems where a universal enclosure is the better fit.
Best For: Buyers who need a universal ported enclosure and are not restricted to Tesla-specific fitment.
Pros:
- Ported design tuned at 46 Hz for deeper bass emphasis.
- Universal fit broadens compatibility beyond a specific vehicle.
- Uses 1-inch MDF front baffle for added rigidity.
- Compact 8-inch format can work well in smaller audio builds.
Cons:
- Not designed specifically for Tesla Model Y vehicles.
- Requires a separate compatible 8-inch subwoofer.
This enclosure is best treated as a general-purpose bass box rather than a Tesla drop-in solution. If your priority is vehicle-specific fit, the Model Y options above are a better match.
Custom Empty Passenger-Side Box – NVX 10" Empty Model Y Box
For shoppers focused on tesla model y subwoofer enclosures with a custom OEM-style fit, this NVX empty box is designed for 2020-2023 5-seat Model Y vehicles. It uses a hand-laid fiberglass shell, fits into the passenger-side trunk area, and lets you choose your own 10-inch subwoofer instead of buying a loaded package.
Best For: DIY buyers who want a vehicle-specific empty enclosure and prefer selecting their own subwoofer.
Pros:
- Vehicle-specific fit for Tesla Model Y 2020-2023 5-seat models.
- Empty enclosure gives you flexibility to choose your own 10-inch driver.
- Hand-laid fiberglass construction with carpeted finish for an OEM-style look.
- Includes pre-wired terminal cup and speaker wire for easier installation.
Cons:
- Does not fit 7-seat models.
- Maximum mounting depth is limited to 5.5 inches.
This is a strong choice if you want control over the subwoofer brand and power handling while keeping a factory-style fit. The compact sealed design and included wiring details make it a practical DIY-friendly enclosure.
Universal Dual-8 Ported Bass Box – Skar Audio SK2X8V
If you’re shopping for tesla model y subwoofer enclosures, the Skar Audio SK2X8V is a universal dual 8-inch ported box aimed at strong, responsive bass in a wide range of vehicles. It uses a kerf port design for smoother airflow, a 2.00 ft³ internal volume, and a 39 Hz tuning, so it leans toward deeper low-end output rather than compact stealth fitment.
Best For: Drivers who want a dual-8 ported enclosure with a large footprint and straightforward install hardware.
Pros:
- Dual 8-inch chambers for a high-output layout
- Kerf port design tuned to 39 Hz for deeper bass response
- Premium push terminals with internal speaker wire leads
- Competition-grade build with a 2-year limited warranty
Cons:
- Universal fit design is not made specifically for Tesla Model Y
- Large enclosure size may take up significant cargo space
- Requires your own subwoofers and proper vehicle fitment planning
This is the kind of box to consider when you want a proven ported enclosure format and don’t mind building around a universal design. For Tesla owners, the main question is space and fit, not just bass potential.
Tesla Model Y Driver-Side Empty Box – NVX 10" Sealed Enclosure
Among tesla model y subwoofer enclosures, this NVX option stands out because it is custom-built for the 2020-2023 Model Y and fits the driver side of the trunk while preserving cargo room. It is an empty sealed fiberglass enclosure for 5-seat models only, so you choose the 10-inch driver that best matches your system.
Best For: Model Y owners who want a vehicle-specific sealed box and plan to pick their own 10-inch subwoofer.
Pros:
- Vehicle-specific fit for Tesla Model Y 2020-2023 5-seat models
- Sealed fiberglass construction shaped for a factory-style appearance
- Designed for one standard 10-inch subwoofer
- Pre-wired terminal cup and premium speaker wire simplify installation
Cons:
- Does not fit 7-seat models
- Empty enclosure means you still need to buy a subwoofer
- Maximum mounting depth is limited to 5.5 inches
This is the most fit-focused choice in the group, especially if you want an OEM-style enclosure that uses space efficiently. The tradeoff is that you need to supply the driver and stay within the box’s depth and sizing limits.
Loaded Tesla Model 3 Bass Box – Skar Audio 10" Side-Firing Enclosure
Skar Audio Single 10" Loaded Subwoofer Enclosure Compatible with 2017-2023 Tesla Model 3 Vehicles
Check Price On AmazonIf you’re comparing tesla model y subwoofer enclosures but want a vehicle-specific package from the same category, this Skar Audio enclosure is a loaded 10-inch setup made for 2017-2023 Tesla Model 3 vehicles, including early 2024 non-Highland cars. It comes pre-installed with a VD-10 D2 subwoofer, is pre-wired to a 1-ohm final load, and uses a lightweight fiberglass housing with trunk-liner carpeting.
Best For: Drivers who want a ready-to-install loaded enclosure instead of sourcing a separate subwoofer.
Pros:
- Loaded package includes a Skar Audio VD-10 D2 10-inch subwoofer
- Pre-wired to a 1-ohm final impedance load
- Vehicle-specific fiberglass design with automotive-grade carpeting
- 800 watt max power rating for a strong bass-focused setup
Cons:
- Made for Tesla Model 3, not Model Y
- Only works with 2017-2023 Model 3 vehicles and early 2024 non-Highland models
- Side-firing layout may not suit every installation preference
This is a convenient all-in-one solution if you want a loaded enclosure and don’t want to match a separate driver to the box. Just be sure the vehicle compatibility matches your car before buying.
OEM-Style Fit – NVX Single 10" Empty Box for Model S/Y
If you’re comparing tesla model y subwoofer enclosures and want a clean, vehicle-specific fit, this NVX empty enclosure is built to tuck into the driver-side trunk area while preserving cargo space. It is designed for a single standard 10-inch subwoofer, so you can choose the driver and tuning that best match your system goals.
Best For: Tesla Model S and Model Y owners who want a custom-fit, unloadable sealed box and plan to choose their own 10-inch subwoofer.
Pros:
- Custom-engineered for Tesla Model S and Model Y with a driver-side trunk fit.
- Hand-laid fiberglass construction with carpet for a factory-style, OEM-like look.
- 0.60 cubic feet of internal airspace and a 6.5-inch maximum mounting depth.
- Pre-wired terminal cup and included speaker wire simplify installation.
Cons:
- Empty enclosure means you still need to buy a compatible 10-inch subwoofer.
- Mounting depth and cutout specs may limit some larger drivers.
This is a practical option if you want a sealed, custom-fit enclosure without giving up trunk usability. The tradeoff is that you have to supply the subwoofer yourself, but that also gives you more control over the final sound and power handling.
Model Y Sealed Fit – Skar Audio Single 10" Sealed Enclosure for Model Y
Skar Audio Single 10" Sealed Subwoofer Enclosure Compatible with 2020-2024 Tesla Model Y Vehicles
Check Price On AmazonFor shoppers focused on tesla model y subwoofer enclosures, this Skar Audio sealed box is a model-specific option for 2020-2024 Tesla Model Y vehicles, with compatibility extending to early 2025 non-Juniper Model Y. Its side-firing design and 0.81 cubic feet of air space make it a straightforward choice if you want a sealed enclosure that stays compact and easy to work into a trunk setup.
Best For: Tesla Model Y owners who want a sealed, side-firing 10-inch enclosure with model-specific fitment.
Pros:
- Compatible with 2020-2024 Tesla Model Y vehicles, plus early 2025 non-Juniper models.
- Side-firing design with 0.81 cubic feet of air space.
- Pre-soldered 12-gauge OFC speaker wire and terminal cup included.
- Premium automotive-grade black trunk-liner carpeting gives it a clean finish.
Cons:
- Empty enclosure requires you to supply a compatible 10-inch subwoofer.
- 4.75-inch mounting depth may not suit every driver.
This is a sensible pick if you want a Tesla-specific sealed enclosure with simple wiring support and a finished look. Its fitment focus and side-firing layout make it appealing for a tidy trunk installation.
Compact Model 3 Fit – NVX 10" Empty Sealed Box for Model 3
Custom Fit 10" Empty Sealed Subwoofer Enclosure for 2017-2022 Tesla Model 3 by NVX
Check Price On AmazonIf you’re building around tesla model y subwoofer enclosures but drive a Model 3, this NVX sealed box is the kind of vehicle-specific alternative that keeps the same no-wasted-space philosophy. It is engineered for 2017-2022 Tesla Model 3 vehicles, fits the driver-side trunk area, and is designed for one standard 10-inch subwoofer with a compact 0.65 cubic feet of internal volume.
Best For: Tesla Model 3 owners who want a driver-side sealed enclosure and plan to choose their own 10-inch subwoofer.
Pros:
- Custom-engineered for 2017-2022 Tesla Model 3 with a driver-side trunk fit.
- 0.65 cubic feet of internal volume for a compact sealed design.
- Pre-wired terminal cup and premium speaker wire support easier installation.
- Hand-laid fiberglass with carpeted finish helps it blend into the cargo area.
Cons:
- Empty enclosure means you need to supply a 10-inch subwoofer.
- 4.5-inch maximum mounting depth limits taller drivers.
This enclosure makes sense if you want a tailored, space-saving bass solution and prefer to pick the subwoofer yourself. The fitment and wiring details make it a practical DIY-friendly option for a clean trunk install.
How We Picked These Tesla Model Y Subwoofer Enclosures
We prioritized vehicle-specific fit, enclosure style, build quality, and compatibility with common subwoofer sizes. Because Tesla cabins are compact and acoustically sensitive, we also looked at how well each option supports clean low-frequency output without unnecessary bulk.
We gave extra weight to designs that simplify installation, preserve usable space, and clearly match Model Y applications. That helps narrow the field to the most relevant Tesla Model Y Subwoofer Enclosures for everyday buyers.
Quick Comparison: What Matters Most
In short, sealed enclosures usually favor tighter, more controlled bass, while ported enclosures can deliver more output and a bigger low-end presence. Loaded enclosures are the easiest path if you want a faster, more plug-and-play upgrade, while empty boxes give you more freedom to choose your own driver.
If you are comparing Tesla Model Y Subwoofer Enclosures, start with your goal: sound quality, output, or installation convenience. That single choice will eliminate most of the options quickly.
Key Buying Factors for Tesla Model Y Subwoofer Enclosures
Fit and Vehicle Compatibility
Always confirm the model year range and whether the box is designed for the driver side, passenger side, or another specific location. A true vehicle-specific fit can reduce rattles, improve security, and make installation much cleaner.
Sealed Vs. Ported
Choose sealed if you want compact dimensions, smoother bass, and better control. Choose ported if your priority is higher output and a more forceful response. The best choice depends on whether you listen to hip-hop, EDM, rock, or a mix of everything.
Loaded Vs. Empty
Loaded enclosures include the subwoofer driver, which can save time and reduce guesswork. Empty enclosures are better if you already own a sub or want to select your preferred driver and amplifier pairing.
Materials and Build
Fiberglass, MDF, and reinforced composite designs each have tradeoffs. Look for sturdy construction, secure terminal connections, and a design that resists flex, since enclosure rigidity directly affects bass clarity.
Who Should Buy Which Tesla Model Y Subwoofer Enclosures?
If you want the simplest upgrade, a loaded, vehicle-specific enclosure is usually the best starting point. If you already have a favorite subwoofer, an empty sealed box gives you more control and often a cleaner daily-driver result. Buyers chasing maximum volume should lean toward a ported design, while those who want stealthy, balanced bass should stick with sealed models.
For most shoppers, the best Tesla Model Y Subwoofer Enclosures are the ones that match both your listening habits and your installation comfort level. That combination delivers better results than chasing output alone.